Access Control MDS ( 32 doors)
The MDS central unit is the controller for MDS Digital audio/video door entry
and access control systems. Lets you integrate the following functions:
. Video door entry system with electronic directory and multiple guard
units.
. Access control for residents.
. Lift control for residents and
visitors.
. Automated services: switching on/off lighting, irrigation,
purification, etc.
. Technical alarms in the community and home.
.
Intercommunication between guard units and elevators, garages, stair landings.
Being able to integrate all these functions in the same equipment mean a
great saving by sharing resources and infrastructures (wiring, controllers) and
simplicity of management: one-person maintenance and management.
Communication with all devices is by means of communication buses that
enormously facilitate installation of the product.
Each central unit
comes provided with a PC configuration and administration software (Wincom+)
with the following functions:
- User authorizations and cancellations:
electronic directory, access control.
- Access restrictions configuration.
- Incidents record.
- Installation test.
MDS Digital system:
Simplified BUS installation digital audio and video door entry system that lets
you manage buildings and residential complexes of unlimited size and able to
integrate all the community services:
- Audio and Video Door Entry
Systems
- Intercommunication between accesses.
- Access Control
-
Centralized and automated security
Requires Central Unit/s to manage the
installation (Capacity per UC: 9999 homes, 32 accesses/guard units. Can link up
to 63 UCs). Can be either general entrances or interior blocks.
MDS systems
require floor Decoders to connect the homes to the installation BUS and act as
insulators. Home-panel communication is private.
Wiring:
- Audio:
6-wire bus.
- Video: audio bus + Coaxial (video) + 2 power supply
wires.
Maximum distance in the installation depending on the cable section
used (see technical manuals).
Centralized MDS Access Control System.
Composed of one part hardware: MDS central units, readers, decoders, etc. and
one part software that lets you configure and manage the
installation.
Restricts access to certain private zones of a facility
(office, warehouse, factory, sports area) to those persons not in possession of
a authorized credential or identification.
Enables complete management of an
installation with several doors and advanced access control functions:
restrictions by user groups, both spatial (areas) and temporal (schedules),
anti-passback function, capacity limitation, greater user capacity, activation
of devices from the reader, recording of incidents for consultation later,
control or security centre.
In contrast with other systems, MDS access
control lets you integrate other complementary functions with no need for
additional controllers:
- Intercommunication. For those accesses where we
have to allow access to other people from outside the facility. By pressing a
button we contact the control centre and access is permitted from there.
-
Lifts. Access to certain floors may be restricted depending on the
identifier.
- Technical or intruder alarms. Each entrance and exit can be
programmed with a detection and action time.
- Automation. Weekly programmer
which can schedule up to 32 daily activations of relays and arming of sensors,
individually or in groups.
The user information and associated restrictions
are stored in a Central Unit that takes the decisions to allow or deny
access.
In facilities that exceed these specifications (more readers or
users) up to 63 central units can be grouped together.
Reader wiring: 2
wires + screened twisted pair
Intercommunication wiring. 4 wires + screened
twisted pair
