Network Paging Gateway

<h2>Zycoo Network Paging Gateways — Bridging Analog PA to IP</h2>

<p>A paging gateway is how you modernize a public address system without 
replacing it. The Zycoo X10 and X30 sit between your existing analog 
infrastructure and a SIP network, letting legacy speakers, amplifiers, 
microphones and call buttons operate as IP audio endpoints. Existing 
wiring stays in place; control, zoning and scheduling move to the network.</p>

<h3>X10 and X30</h3>
<p>The X10 handles single-zone integration and doubles as a low-cost 
intercom or paging terminal when paired with an external button, 
microphone and passive speaker. The X30 covers multi-zone deployments 
where several analog areas need independent addressing from one device.</p>

<h3>Where gateways make sense</h3>
<ul>
  <li><strong>Phased upgrades</strong> — modernize zone by zone across 
      budget cycles instead of as one capital project</li>
  <li><strong>Buildings with sound wiring</strong> — schools, warehouses 
      and older commercial properties where the 70V distribution is 
      still serviceable</li>
  <li><strong>Mixed deployments</strong> — new IP speakers in renovated 
      areas, gateways covering the untouched zones, all managed from one 
      system</li>
  <li><strong>Access and entry points</strong> — the X10 turns a button, 
      mic and speaker into a two-way intercom station at gates, docks 
      and payment kiosks</li>
</ul>

<h3>Integration</h3>
<p>Gateways register to the Zycoo IP Audio Center or to a third-party 
SIP server. Once on the network, an analog zone behaves like any other 
endpoint — addressable individually, groupable, and available for 
scheduled and emergency broadcast.</p>

<p>For retrofit assessment or help scoping a mixed analog and IP 
deployment, contact our technical team in Toronto or Laval.</p>