Network Speaker

<h2>Zycoo Network Speakers — PoE Endpoints for SIP Paging</h2>

<p>Zycoo network speakers are self-contained IP audio endpoints. Each unit 
carries its own Class-D amplifier and registers to a SIP server, so a single 
Cat6 run delivers power, audio and management — no 70V distribution, no 
head-end amplifier, no local power supply. Every model supports PoE (IEEE 
802.3at), multicast and peer-to-peer operation.</p>

<h3>Choosing the right model</h3>
<table>
  <tr><th>Model</th><th>Type</th><th>Typical application</th></tr>
  <tr><td>SC10 / SC15</td><td>Ceiling</td>
      <td>Offices, corridors, retail floors, classrooms</td></tr>
  <tr><td>SW15</td><td>Wall / cabinet</td>
      <td>Rooms where ceiling mounting isn't practical</td></tr>
  <tr><td>SH10 / SH30</td><td>Outdoor horn</td>
      <td>Loading docks, yards, parking areas, high-noise industrial</td></tr>
  <tr><td>SL30 / SL50</td><td>Column</td>
      <td>Directional coverage — platforms, atriums, long corridors</td></tr>
</table>

<h3>Deployment notes</h3>

<p><strong>Power budget.</strong> These are 802.3at (PoE+) devices. Confirm 
your switch has the per-port and total budget before specifying — a full-rack 
speaker deployment adds up quickly on a switch sized for cameras.</p>

<p><strong>Outdoor rating.</strong> The SH10, SH30 and SL30 carry IP65 or 
better enclosures for exterior and semi-exterior installation.</p>

<p><strong>Third-party SIP.</strong> Speakers register to the Zycoo IP Audio 
Center or to an existing SIP server, so you can add paging endpoints to a 
phone system already in place.</p>

<p><strong>Dante option.</strong> The SC15 and SW15 are available in a 
Dante-supported software variant for professional AV environments. This 
version drops SIP and multicast in favour of Dante terminal operation — 
specify which you need at order time.</p>

<p>For coverage calculations or help selecting models by zone, contact our 
technical team in Laval or Toronto.</p>